Insta Chemi Private Limited
Noida, Gautam Buddha Nagar, Uttar Pradesh
GST No. 09AAGCI0124E1Z1
Call 08048958481 81% Response Rate
Send Enquiry
New Items
Anionic Polyelectrolyte Powder
Minimum Order Quantity: 25 Kg
| Physical form | Powder |
| Ionic charge | Anionic high |
| Molecular weight | High MW |
| Grade | Industrial |
| Viscosity | Medium |
| Pack size | 25 kg |
| Application | Mining |
Anionic Polyelectrolyte is a water- soluble high polymer. It’s not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid.
Anionic polyacrylamide series products are water soluble linear polymers synthesized under high degree polymerization, easily soluble in water, mainly used in water clarification and purification treatment. Due to its molecular chain contains a certain amount of negative gene, it can through the adsorption of solid particles suspended in water, make the bridge between particles or by charge neutralization particles condensed to form large flocculate, so it can accelerate particle in the slurry settlement also, there is a very significant effect to speed up the solution to clarify, promote the filter and so on.
Advantages:
♦ environmental friendly
Specifications:
Physical Properties:
| TEST | PROPERTIES |
| Ionic Type | Anionic |
| Appearance | White |
| Bulk Density (g/ml) | 0.5-0.8 |
| Molecular weight | Approx. 15 to 18 million |
| pH (0.2%)soln Indistiiled water | 6 to 8 |
| Form | Powder / Viscous Jelly |
| Solubility | Totally soluble in water |
| Effective PH Range | 3 to 11 (More effective at slightly alkaline) |
| Flash Point | Above 90” C |
| Hydrolysis | 20 to 30% (Approximately) |
| Dilution | Fast Flock 60 should be diluted 200 to 300 times with water before application |
APPLICATION:
- Treatment of service water
- Clarification and filtration of river water and industrial water.
- Condensation and dehydration of sludge from industrial water treatment.
- Process treatment Chemical Sedimentation and condensation of magnesium hydroxide in manufacturing process of magnesium clinker (Mgo). Clarification of phosphoric acid solution.
- Mining
Sedimentation of slimes of copper, zinc, sulphides ores.
Filtration of slimes and coal powder. - Oil
Enhanced oil recovery. - Ceramic
Condensation, sedimentation of slurry in wet type cement manufacture. - Waste water treatment
- Pulp and paper
Recovery and clarification of white water, steel and metal
2. Treatment of sewage containing blast furnace dust.
3. Treatment of sewage from metal plating.
4. Treatment of sewage from acid cleaning of metals. - Chemical
Treatment of sewage from red oxide manufacture. - Textile
Treatment of sewage from wool washing.
2. Treatment of sewage from dyeing. - Mining
Treatment of sewage from mining process.
2. Treatment of coal washing.
- Pulp and paper
Packing: 25 Kg Bag
Additional Information:
- Production Capacity: 10,000 Kgs
- Delivery Time: 1-2 days
- Packaging Details: Bags
View Complete details
Polyelectrolyte Cationic Powder
Minimum Order Quantity: 25 Kg
| Physical form | Powder |
| Ionic charge | Cationic low |
| Molecular weight | Specific Grades The molecular weight varies by grade, which are optimized for specific applications |
| Grade | Water grade |
| Viscosity | 300 – 600 |
| Pack size | 25 kg |
| Application | Dewatering |
| pH range | 5 to 8 |
Cationic Polyelectrolyte is a water- soluble high polymer.It’s not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid.
Cationic Polyelectrolyte flocculant is a kind of linear macro molecular compounds dissolve in water, the molecular weight between 600-12 million, cationic PAM in acidic or alkaline medium is electro positive, such can effectively suspended particles in the sewage wastewater with negatively charged for flocculation precipitation.
Cationic Polyelectrolytes are used for charging polymers after dissociation in aqueous solution. They are known to play an important role in treatment of waste water by flocculating or precipitating suspended solids for their efficient removal. These polyelectrolytes also find application for stabilizing solutions and improving their flow characteristics. Some of Cationic Polyelectrolytes are water soluble in nature which makes them suitable to be used for medical & biochemical applications. They are known to have ion exchanging, conditioning, emulsifying, & dispersing ability depending upon purpose of their use.
Application Field:
Water treatment: It is mainly used for the sludge dewatering and decrease the rate of water content of sludge
Water treatment: It can be used to treat industrial wastewater and life sewage water.
Paper industry: It can be used for paper making to improve dry and wet strength of paper and to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.
Others: Except above application field, CPAM or PAM can use many industry,E.G paper making auxiliary chemicals,textile sizing agent,oil-filed chemicals,sugar waste water, Beverage factory wastewater),etc
Advantage:
- Easy to dissolve, dissolve time 40 min.
- High efficiency.
- High molecular, molecular weight 10 million.
- High purity, without impurity.
Specifications:
| Item | Cationic type |
| Appearance | white fine-sand shaped powder or colorless transparent colloid |
| Molecular weight | 8 million~10 million |
Application Method
- It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.
- When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60°C.
- The most economical dosage is based on the trial.
Keywords:polyelectrolytes, polyelectrolyte, cationic polyelectrolyte, polyelectrolyte cationic powder, cationic polyelectrolyte water treatment
Additional Information:
- Item Code: 39069090
- Production Capacity: 10,000KGS
- Delivery Time: READY STOCK
- Packaging Details: PAPER BAG
View Complete details